The fastest and easiest way to shield instrument pickup cavities, control cavities and other smaller areas. When connected to electrical ground, the shielded surfaces help reduce noise, hum and radio interference. It cleans up with water while still wet, and dries overnight.
Brush on two or more coats of this waterbase dark gray conductive paint for best results (let dry between coats). Conductive shielding paint is supplied in a 1/2-pint can, sufficient for shielding several electric guitars.
Stir before applying (thin with water if evaporation has occurred in storage). Apply at least 2 coats to clean dry surfaces. Allow 24 hours between coats. Keep this container tightly closed after use. Wear protective goggles and rubber gloves when using this product. Avoid prolonged inhalation and contact with eyes, skin and clothing.
Keep out of the reach of children.
Explosion: None
Inhalation: No acute effects expected within exposure limits
Ingestion: Low order of toxicity
Eyes: May cause temporary eye irritation
Skin: Repeated or prolonged contact can cause irritation or dermatitis
Contains
| Compound Name |
CAS# |
| Graphite |
7782-42-5 |
| Carbon black |
133-86-4 |
| 2-Butoxyethanol |
111-76-2 |
| VOC Content: 110 G/L |
| 
