By using two isolated outlets this series adapter Flex gives you the sum
of voltages of the two isolated outlets used. This adapter cable should
be used in combination with any of CIOKS standard Flex cables if want
to power an 18V or 24V pedal. It gives you not only the higher voltage
but also the possibility to choose the type of plug at the pedal end
plus the length you need. The plug type and length is determined by the
standard Flex cable used with the adapter Flex.
If you’re looking for a simpler way to power an 18V pedal with a
standard 5.5/2.1mm centre negative DC-plug (BOSS standard) please have a
look at CIOKS Stack Flex.
Note: the series adapter Flex makes a series connection of the two
outlets used. These two outlets must be isolated from each other. You
get the sum of voltages and not the current (mA). If you use it with two
9V outlets with a 100mA rating each you’ll get 18V and still a max.
current of 100mA. If you use it with two 9V outlets with 200mA each
you’ll get 18V and max. 200mA. If you use it with two outlets rated to
max. 200mA set to 12V you’ll get 24V and still max. 200mA.